The use of the sliding foil ensures the reduction of the forces caused by the compression as well as the thermal stretching of the reinforced concrete ceilings. This prevents cracks in the walls. See also sliding strips with load centering for larger widths.
The function of the foam is to compensate for inequalities and asperities on the supporting surface.
FOLIE GLISANTA imbracata cu elastomer pentru sarcini de pana la 3 N/mm² pentru separarea componentelor din zona fundatiei si reducerea fortelor cauzate de comprimare si fulaj si modificarea temperaturii componentelor sau a subsolului. Pentru sarcini mai mari de pana la 10 N/mm² vezi Tg5 POM.
Isolations in the elastomer are absolutely necessary to compensate for the existing granulation and minor deviations from the parallelism of the surfaces.
For separating large surface components and reducing forces caused by thermal elongations and those resulting from concrete technology between components and subsoil or between existing and new components, : swimming pools, storage tanks, skating rinks in the case of renovation of the existing structure plates.
The lower and upper protective layers are recommended for the mechanical protection of the sliding foil and for compensating the remaining inequalities in the supporting surface. If the manufacturer considers other protection measures due to special forces, it is possible to provide non-insulated Tg1 A sliding sheets or Tg 1A + b3 on one side.
TG 5 sliding foil with elastomer coated up to 10 N / mm² for separating high load components (eg in the foundation area) and reducing forces due to temperature variations, compression, etc.
Elastomeric insulations are absolutely necessary to compensate for existing granulation and minor deviations from surface parallelism.
